REBEL LT with DIALOG polls the UDS DIDs you choose during a test and logs the responses decoded to physical values alongside the CAN traffic.

In the customer's words

  • Our current data loggers couldn't capture all parameters for the Mercedes via the OBD port. Influx Technology intervened, scanning the vehicle to create a custom data logger…

    Leeds UniversitySchool of Chemical and Process Engineering

  • We needed the benchmarking to gain access to more CAN signals… With those signals, we can build a better model of the vehicle state.

    Marc HeinrichResearch Scientist Intelligent Systems and Production Engineering, FZI Forschungszentrum Informatik

  • …it can be used for some quite advanced functions, such as a gateway for UDS/CCP signals, re-transmitting these over a standard broadcast CAN connection…

    Chris PolmearDurability & Measurement Manager, UTAC

  • 7 UDS services on REBEL LT
  • ODX Import by drag and drop
  • >8 B Multi-frame responses reassembled on the device

The UDS logging setup

Read the detail

The parameters a research or validation team needs are often not broadcast on the bus. They sit behind UDS services on an ECU the team has no documentation for, and a generic OBD tool returns only the emissions set.

REBEL LT with DIALOG. Choose the ISO 14229 preset or customise it, import an ODX file by drag and drop or add PIDs by hand, pick the DIDs and the polling rate for each, and log the responses decoded to physical values alongside normal CAN traffic. Multi-frame responses over 8 bytes are reassembled on the device. UDS services 0x1, 0x19, 0x21, 0x22, 0x23, 0x1A and 0x2C, with fast DAQ where the module supports it. Where the team does not know which ECUs hold which data, Module Analyser builds an ODX framework from any UDS compliant module, so the ECUs are mapped before the logger is configured.

  1. 01Map

    Module Analyser maps the ECUs first, where they are unknown

  2. 02Choose

    Import the ODX file, pick the DIDs and a polling rate for each

  3. 03Log

    Responses decoded to physical values beside the CAN traffic

The hardware

  • Vehicle diagnostics logger

    REBEL LT

    £1,249 ex VAT £1,498.80 inc VAT

Related pages

One recording
  • DID values as physical signals
  • DTCs captured the moment a trigger fired
  • The raw CAN trace on the same clock

The recording

What the recording contains

Exported to MDF4, CSV or MATLAB for the team's own tools.

Industries

Where this applies

Read more

Understanding UDS, Unified Diagnostic Services

The diagnostic language behind every modern ECU. How a UDS request is built, what the service IDs mean and how to read the reply.

Questions engineers ask

Question not answered?

Ask an engineer

Which UDS services does REBEL LT support?

UDS services 0x1, 0x19, 0x21, 0x22, 0x23, 0x1A and 0x2C, with fast DAQ where the module supports it.

Do I need an ODX file?

No. Import an ODX file by drag and drop or add PIDs by hand. Where the team does not know which ECUs hold which data, Module Analyser builds an ODX framework from any UDS compliant module, so the ECUs are mapped before the logger is configured.

What about responses longer than 8 bytes?

Multi-frame responses over 8 bytes are reassembled on the device.

Why not use a generic OBD tool?

A generic OBD tool returns only the emissions set. The parameters a research or validation team needs often sit behind UDS services on an ECU the team has no documentation for.

What does the recording contain?

DID values as physical signals, DTCs captured at the moment a trigger fired, the raw CAN trace on the same clock, exported to MDF4, CSV or MATLAB for the team's own tools.

Related use cases

Tell us about your application

Describe the measurement, the networks and the number of vehicles. Our engineering team recommends the configuration and typically responds within one working day.