REBEL LT or REBEL CT logs CCP or XCP measurements from the A2L while K-BOX puts the sensor channels on the same bus and clock.

In the customer's words

  • Now we could hardly take the system off the vehicle as we could not do the vehicle test without it.

    Research LaboratoryTesting Technical Manager

The XCP and sensor setup

Read the detail

Calibration engineers need the ECU's internal variables over CCP or XCP, described by the A2L, and at the same time the physical result: a pressure, a flow, an RPM from a sensor the ECU does not see. On tractors and off-highway machines the physical side often includes implement measurements such as plough depth.

REBEL LT, or REBEL CT where more buses are in play, logs CCP or XCP measurements from the A2L alongside the CAN traffic. K-BOX adds the analogue, frequency and digital channels for the sensors and puts them on the same bus and clock. Analysis in DIALOG. When the calibration changes and the A2L moves on, the logger configuration must follow it or the data is wrong; in a fleet this is the reason to plan how configurations are distributed. Configuration changes on a REBEL fleet are loaded at the vehicle.

  1. 01Describe

    The A2L names the CCP or XCP measurements to log

  2. 02Connect

    K-BOX puts the sensors on the same bus and clock

  3. 03Analyse

    ECU internals and sensors in one recording, analysed in DIALOG

The hardware

  • Vehicle diagnostics logger

    REBEL LT

    £1,249 ex VAT £1,498.80 inc VAT
  • Automotive engineering logger

    REBEL CT

    £1,849 ex VAT £2,218.80 inc VAT
  • Multi-sensor data acquisition

    K-BOX

    £1,599 ex VAT £1,918.80 inc VAT

Related pages

Tractor working in a field

Agriculture

A tractor field‑test fleet

A tractor manufacturer fitted each machine in a field-test fleet across several countries with REBEL CT and K-BOX, logging high-rate CCP and XCP ECU data with flow, RPM and plough depth and using GPS to measure the area covered during a test.

REBEL LT helped us in logging Tractor ECU data along with Additional Sensor Data with the help of K-BOX.
Tractor OEM

Industries

Where this applies

Understanding CCP and XCP: reading and tuning an ECU

Read more

Understanding CCP and XCP: reading and tuning an ECU

How tools read and tune a running ECU. CCP and XCP, the A2L file and the difference between polling and DAQ measurement.

Questions engineers ask

Question not answered?

Ask an engineer

Can I log XCP data and physical sensors in one recording?

Yes. REBEL LT, or REBEL CT where more buses are in play, logs CCP or XCP measurements from the A2L alongside the CAN traffic. K-BOX adds the analogue, frequency and digital channels for the sensors and puts them on the same bus and clock.

What happens when the calibration changes?

When the calibration changes and the A2L moves on, the logger configuration must follow it or the data is wrong. Configuration changes on a REBEL fleet are loaded at the vehicle.

REBEL LT or REBEL CT?

REBEL LT, or REBEL CT where more buses are in play.

Where is the data analysed?

In DIALOG.

Related use cases

Tell us about your application

Describe the measurement, the networks and the number of vehicles. Our engineering team recommends the configuration and typically responds within one working day.