Products
Hardware and software for every test programme.
Data loggers, instrumentation modules and companion software. Each range is built around a single job, and all of them speak the same CAN bus language.
01 / Data loggers
Data loggers
CAN bus data loggers for every stage of development. REXGEN for compact fit and forget capture, REBEL for diagnostics running on the recording device, REXGEN Pro when the whole programme runs on one platform.
Compare data loggers side by side
REXGEN 1
Compact single-channel CAN 2.0 data logger recording to 8GB eMMC. Wakes on bus activity, streams live over USB and converts free with REXDESK.
New inREXGEN 2
2-channel CAN and CAN FD logger with LIN, analog and digital inputs and up to 32GB storage. The IMU variant adds GNSS, accelerometer and gyro.
REXGEN Air
CAN to cloud data logger with up to 4 CAN and CAN FD channels, LTE, GNSS and 6-axis IMU. Configure over the air, data lands in your own AWS stack.
REBEL LT
CAN bus data logger with UDS, CCP, XCP, J1939 and OBD-II support plus 4 analog inputs. Runs unattended fleet trials and diagnostics with DIALOG.
REBEL CT
Rugged CAN data logger with 2x CAN and 2x CAN FD channels, UDS, XCP and J1939 support. IP65 aluminium housing, SD storage and wake on CAN.
REXGEN Pro
CAN to cloud data logger with up to 4 CAN and CAN FD channels, LTE CAT4, GNSS and edge compute. 32GB storage, managed over the air.
02 / Instrumentation
K-Series instrumentation
Signal conditioning modules that extend a logger over CAN bus. Thermocouple, voltage, IEPE and analogue channels, with K-CAL for configuration and DBC export.
Compare instrumentation side by side
K-TC
Thermocouple to CAN module in 8, 16 or 32 channel versions for K, J and T types. ±1°C accuracy from -200°C to +1200°C, logs standalone to 8GB eMMC.
K-BOX
8 thermocouple and 8 analog inputs in one stackable CAN module. 1kHz analog sampling, ±80V ranges, sensor power outputs and isolation throughout.
K-AN8
8-channel analog to CAN module with PWM, frequency and counter inputs. ±80V to ±10V ranges, ±0.0015% accuracy, engineering units on the bus.
03 / Software
Companion software
Free tools for every Influx Technology product. REXDESK for REXGEN, K-CAL for K-Series, DIALOG for REBEL.
Explore all software
For REXGEN data loggers
REXDESK
Configure logging, import DBC files, view live CAN traces and export recorded data. Free, no licence required.
For K-Series instrumentation
K-CAL
Configure, calibrate and monitor K-Series modules. Built in oscilloscope and multi device DBC export. Free.
For REBEL data loggers
DIALOG
Configure REBEL loggers, analyse data and manage fleets. Free Configurator plus licensed Standard and Plus tiers.
Why Influx Technology
What sets us apart
Designed, tested and supported by our global team.
Millbrook Proving Ground
Our UK headquarters sit within one of Europe's leading vehicle test facilities. We develop and validate hardware in real test conditions.
Direct engineering support
Your enquiry is handled by the engineers who designed the hardware. No reseller layer, no third-party support desk.
Full-stack control
Hardware design, firmware, desktop software and cloud platform all developed in-house. No third-party dependencies in the signal chain.
Free software, no licence fees
REXDESK, K-CAL and DIALOG are free with every hardware purchase. No per-seat charges, no annual renewals.
Talk to us
Not sure which hardware fits the job?
Tell us about the vehicle, the networks and the signals you need. An engineer will scope the right setup with you.