Instrumentation
Expand what a logger can measure.
K-Series modules extend a REXGEN or REBEL logger with thermocouple, voltage and analogue channels. All of it speaks CAN bus, all of it works with K-CAL.
01 / K-Series
Signal conditioning modules
Every K-Series module connects to a REXGEN or REBEL logger over CAN bus. Thermocouple, voltage and analogue channels, configured and calibrated in K-CAL.
Compare instrumentation side by side
K-TC
Thermocouple to CAN module in 8, 16 or 32 channel versions for K, J and T types. ±1°C accuracy from -200°C to +1200°C, logs standalone to 8GB eMMC.
K-BOX
8 thermocouple and 8 analog inputs in one stackable CAN module. 1kHz analog sampling, ±80V ranges, sensor power outputs and isolation throughout.
K-AN8
8-channel analog to CAN module with PWM, frequency and counter inputs. ±80V to ±10V ranges, ±0.0015% accuracy, engineering units on the bus.
02 / Software
Configured in K-CAL
One free tool covers the whole K-Series range. Calibrate, monitor and export DBC files for REXDESK or DIALOG.
Explore all software
Talk to us
Tell us what you need to measure.
We will map it to the right module and the logger to pair it with.