GeneralPinout
Cables and accessories: part number index
Find any Influx Technology cable or accessory by its INF part number and go straight to its pinout. You can also find the pinout guide and spec sheet for any logger or module.
How the part numbers work
Cables and accessories carry an INF part number in three families. INF41xx are vehicle and harness cables, INF42xx are breakout, adapter and terminal cables, and INF43xx are PC, link and termination accessories. The tables list each part, what it connects to and the guide with its pinout.
INF41xx cables
| Part | What it is | Use with | Guide |
|---|---|---|---|
INF4100 |
Start-up kit harness, 890 mm | REBEL 100 (discontinued) | Legacy REBEL cables |
INF4102 |
OBD type B plug to 25-way D-Sub socket, 1.7 m | REBEL LT and REBEL CT | OBD and power adapter cables |
INF4103 |
OBD type B plug to 9-way D-Sub socket, 1.7 m | REBEL CAN0/PWR leads, REXGEN 1, REXGEN 2, Kvaser interfaces | OBD and power adapter cables |
INF42xx cables
| Part | What it is | Use with | Guide |
|---|---|---|---|
INF4202 |
Expansion port breakout cable, 700 mm | Discontinued REBEL CT variants | Legacy REBEL cables |
INF4203 |
Two CAN breakout cable, 230 mm | REBEL LT (supplied) | REBEL breakout cables |
INF4204.1 |
Multi-connect cable, 5 lead, 230 mm | REBEL CT (supplied) and REBEL LT | REBEL breakout cables |
INF4204.15 |
Molex Mini50 to 9-way D-Sub splitter, 150 mm | REXGEN Air | REXGEN Air pinouts |
INF4206 |
Power adapter: auxiliary power plug or banana plugs to 9-way D-Subs, 230 mm | REBEL, REXGEN 1, REXGEN 2 and K-Series | OBD and power adapter cables |
INF4210 |
REBEL Dash cable, Deutsch 12-way to 9-way D-Sub, 1500 mm | REBEL Dash | Ask technical support |
INF4211 |
25-way to 25-way D-Sub shielded extension, 200 mm | K-BOX and K-AN8 | K-Series link cables |
INF4212.0 |
9-way D-Sub screw terminal, male | Add-on sensor modules | Ask technical support |
INF4212.1 |
9-way D-Sub screw terminal, female | Add-on sensor modules | Ask technical support |
INF4213 |
15-way D-Sub screw terminal for the Dig/An lead | INF4204.1 | REBEL breakout cables |
INF4214 |
25-way D-Sub screw terminal, female | K-BOX and K-AN8 analogue inputs | K-Series link cables |
INF4216 |
Molex Mini50 24-way to 25-way D-Sub, 250 mm | REXGEN Air | REXGEN Air pinouts |
INF4219 |
JAE 34-way automotive connector to 25-way D-Sub with Ethernet | REXGEN Pro | REXGEN Pro overview |
INF43xx accessories
| Part | What it is | Use with | Guide |
|---|---|---|---|
INF4300 |
USB 2.0 A to micro-B cable, 914 mm | K-TC and REXGEN loggers | This guide, below |
INF4301 |
USB 2.0 A to B cable, 914 mm | REBEL loggers | This guide, below |
INF4302 |
Digital switch for marking events, 1800 mm | REBEL, through the INF4204.1 Dig/An lead | REBEL breakout cables |
INF4305.0 |
9-way D-Sub link cable, male to female, 300 mm | Linking K-Series modules, or a K-Series module to a Kvaser interface | K-Series link cables |
INF4305.1 |
9-way D-Sub cable, male to male, 300 mm | Kvaser T-CANnector to a K-Series CAN out connector | K-Series link cables |
INF4306.8 |
External GNSS, 4G and Wi-Fi antenna, FAKRA | REXGEN Pro | REXGEN Pro overview |
INF4308 |
Kvaser T-CANnector V2: CAN hub with three female and one male 9-way D-Sub and adjustable termination | CAN networks on the bench | K-Series link cables |
INF4308C |
9-way D-Sub cable, male to female, fully pinned, 500 mm | Kvaser T-CANnector V2 to a K-BOX | K-Series link cables |
INF4310 |
120 Ω CAN termination adapter, 9-way D-Sub | The end of a K-Series chain or any CAN bus | K-Series link cables |
INF4311 |
External USB isolator | REXGEN 1 and REXGEN 2 | REXGEN 2 pinouts |
INF4313 |
External CAN bus isolator | REXGEN 1 | REXGEN 1 pinouts |
INF4210, INF4212.0 and INF4212.1 belong to products whose guides are not published yet. Contact technical support for their pinouts.
USB cables
INF4300 micro USB cable
This USB 2.0 A male to micro-B cable connects K-TC modules and REXGEN loggers to a PC.
| Item | Value |
|---|---|
| Length | 914 mm |
| Connector A | USB 2.0 type A, male |
| Connector B | USB 2.0 micro-B, male |
INF4301 USB A to B cable
This USB 2.0 A to B cable connects a REBEL LT or REBEL CT to a PC. The REBEL USB port is a type B receptacle.
| Item | Value |
|---|---|
| Length | 914 mm |
| Wire | 26 AWG, 0.4 mm |
| Connector A | USB 2.0 type A |
| Connector B | USB 2.0 type B |
| Operating temperature | -20 to +80 °C |
| Weight | 35 g |
For the REBEL USB pinout, see these guides.
Device pinouts
- REXGEN 1: pinouts, LED and installation
- REXGEN 2 and REXGEN 2 IMU GNSS: pinouts, LEDs and installation
- REXGEN Air: pinouts, harnesses, LEDs and installation
- REBEL LT: connector pinouts
- REBEL CT: connector pinouts
- K-TC: connector pinouts
- K-BOX: connector pinouts
- K-AN8: connector pinouts
- REBEL and K-Series: wiring the wake-up pin and digital I/O
- CAN bus wiring: termination, cable length and grounding
The REXGEN Pro pinout guide is not published yet. See REXGEN Pro: overview and specifications.
Specifications and spec sheets
| Product | Specification guide | Spec sheet (PDF) |
|---|---|---|
| REXGEN 1 | Overview and specifications | REXGEN 1 spec sheet |
| REXGEN 2 and REXGEN 2 IMU GNSS | Overview and specifications | REXGEN 2 spec sheet |
| REXGEN Air | Technical specifications | REXGEN Air spec sheet |
| REXGEN Pro | Overview and specifications | REXGEN Pro spec sheet |
| REBEL LT and REBEL CT | Specifications | REBEL LT spec sheet and REBEL CT spec sheet |
| K-TC | Overview and specifications | K-TC spec sheet |
| K-BOX | Overview and specifications | K-BOX spec sheet |
| K-AN8 | Technical specifications | K-AN8 spec sheet |
To compare products side by side, see compare data loggers and compare instrumentation. The spec sheets replace the older product flyers.
Still stuck?
Our engineers answer support questions on every Influx Technology product.