top of page
TempBanner.png
CT_FlexRay%2045_edited.png

Rebel CT FlexRay

Compact, Configurable Data Logger

Compact, Configurable Data Logger

CAN_Square.png

7x CAN  2.0 buses

GPS_Square.png

High Accuracy GNSS

The Influx Rebel CT FlexRay compact data logger is ideal for development applications that requires up to 7 vehicle CAN 2.0 networks, FlexRay and additional LIN data.

 

The standard Rebel CT FlexRay includes an internal 18Hz GNSS module and a 3D accelerometer.

​

The Rebel CT FlexRay can optionally be upgraded to include GNSS, 3D accelerometer, 3D Gyro, Wi-Fi and 4G LTE. 

LIN_Square.png

3x LIN buses

4G-LTE.png

4G LTE

FlexRay_Square.png

2x FlexRay Channels

WIFI.png

WIFI

Annalog_Square.png

4x analog input channels 

Gyro_Square.png

3x digital I/O channels

Digital_Square.png

3x digital I/O channels

Anchor 1
Key Features
Software
Package Includes
Optional upgrades

Key Features:

■ 7x CAN 2.0 buses

■ 3x LIN buses

■ 2x FlexRay channels

■ 3x digital I/O channels

■ 4x analog input channels (Each channel can be calibrated independently)

■ 18Hz GNSS with 1 KHz xyz Accelerometer

■ Protocols CCP, xCPOnCAN and xCPOnFlexRay, UDS (ISO14229), J1939

■ SDXC card data storage (Maximum capacity 128GB)

■ Galvanic isolation (USB, enclosure)

■ IP65 dust and splash proof cover – SD card securely housed behind a flip panel

■ Low power consumption in sleep mode and WakeOnCAN or WakeOnSignal feature

Data Logger configuration with integrated data analysis.
Dialog_Scope_gps.png

Dialog provides tools to configure, analyse and export Rebel data.

​

■ Build and exchange Rebel data logger configuration files 

■ Connect and re-configure Rebel data loggers via USB. 

■ Monitor live data in a graphical viewer. 

■ Upload and analyse data recording files. 

■ Supports in-field firmware upgrade. 

■ Batch processing and data export

■ Supports direct connection to StreamLog servers.

Downloads

Enclosure Specification

Product Specification

Influx_Analyser_Logo_CMYK.jpg
Our 5 in 1, easy-to-use CAN bus analyser.
MA_Bar_Dial_LED.png

Module Analyser gives you the ability to monitor CAN, LIN and channels Flexray  traffic in a single environment. 

​

■ CAN and LIN monitoring via DBC/LDF/Fibex files

■ Automotive OBD ISO15765 Scan tool and UDS ISO14229

■ J1939

■ Integrated ODX/MDX editor

Influx_StreamLog_Logo_CMYK%20(1)_edited.
1280px-Microsoft_Azure_Logo.svg.png
Effortlessly and securely stream and configure your Rebel data over the internet!
Streamlog Panel.png

StreamLog gives you the ability to access Rebel data directly from your desk!

​

■ Your data is stored within a secure Microsoft SQL database, hosted by Microsoft Azure.

​

Data is encrypted end-to-end using our bespoke security protocol and Microsoft SSL encryption.

​

Configure your Rebel data logger remotely and monitor data as it occurs through your DiaLog software.

​

■ 

■ 

Interested? Get in touch!

Phone-Icon.png
+44 (0) 1525 842504
Email-Icon.png
info@influxtechnology.com

For more information, or to find your nearest team:

  • What are the supported data formats?
    CSV, MF4, MAT, ASC, blf
  • CAN we monitor live data?
    Yes, options for Live trace are available.
  • Is it possible to have 4 channels CAN FD?
    Yes, there are separate products supporting that function.
  • What are the main features available with ReXdesk?
    CAN live view, filter, trigger, sleep modes, DBC option.
  • Why is ReXgen not getting interfaced with the RexDesk?
    Please ensure that you have installed the driver. If not, you can find it under the Influx technology folder under the start menu
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Is it possible to interface ReXgen 2 with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Where can I find the Pinout details for ReXgen 2?
    You can find that under the help section in the ReXdesk software
  • Where can I get the Driver installation process?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • What is the current consumption of ReXgen 2?
    <87mA in full operation and <2mA when CAN is not active
  • How to get real-time physical data?
    ReXgen doesn't provide real-time physical data, the user will have to retrieve the data log and post-process using a DBC file to view the physical data
  • Where can I find the Pinout details for ReXgen 2 IMU?
    You can find that under the help section in the ReXdesk software
  • What is the GNSS accuracy for ReXgen 2 IMU?
    2.5m CEP
  • What is the current consumption of ReXgen 2 IMU?
    <87mA in full operation and <2mA when CAN is not active
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Is it possible to interface ReXgen 2 IMU with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Are there any other connectors available apart from DB9?
    No, But modifications can be done for bulk orders on demand.
  • Where can I get the Driver installation process?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • How to get real-time physical data
    User needs to use the DBC file, and post-collection, it can be exported as CSV
  • Does the ReXgen logger LEDs indicate the status of GNSS logging
    No. It is advised to wait 2 Mins before starting your trial, to a minimum number of 4 satellites.
  • Why does it support only DBC?
    The logger is only capable of logging CAN signal.
  • Is it possible to see a live trace with ReXgen 2 IMU?
    Yes
  • Where can I find the Pinout details for ReXgen Air?
  • What is the current consuption of ReXgen Air?
    <300mA in full operation and <2mA when CAN is not active
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Can we interface ReXgen with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Where can I get the Driver installer?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • How to get real-time physical data?
    ReXgen doesn't provide real-time physical data, the user will have to retrieve the data log and post-process using a DBC file to view the physical data
  • Why is my ReXgen AIR not uploading data to FTPS server?
    There could be several reasons: 1) Ensure that the SIM card is active and has sufficient data 2) Ensure that the GPRS/LTE antenna is connected to the Logger 3) Check the Server and APN settings of the logger
  • Will I be supplied a SIM card
    No SIM card will be supplied. Most standard SIMs are suitable. If in doubt please ask our support team.
  • CAN we monitor live data?
    Yes, options for Live trace are available.
  • Why my logger is not getting Detected?
    Make sure that the ReXgen Driver is installed on your computer; refer ReXgen Support page for instructions.
  • Why is ReXdesk not opening after installation?
    Make sure that Visual C++ Redistributable x64 is installed.
  • Why does exported CSV data have gaps in it?
    ReXdesk Doesn’t export data after Interpolation or Resampling; the data is recorded and timestamped as received from the CAN bus. The gaps will be due to the difference in the transmission rate of various CAN messages.
bottom of page